Lots of sanding on the quarter. Some areas will need work. The bottoms are not nice at all and the sides have some dents. All bondo is from previous owners(s)
Saturday, November 17, 2012
Saturday, November 3, 2012
My Ingersoll Rand SS5L5 is finally up and running! It works great and provides constant air with out waiting. It was a long road to get to this point.
![]() |
| Ingersoll Rand SS5L5 5hp 60 Gallon 18.1CMF@90 135 PSI Max "Industrial" 230v Compressor |
Tuesday, September 11, 2012
Quick Look - 68 Dodge Coronet Body in 3D - Work in Progress
Garage upgrade - Outlets and Lighting
Chris Rapple came out and he (and partially I) installed a full lighting fixture for better lighting and also conduit with 2 independent 120 outlets and 1 240 outlet. These pictures are from directly after it was finished.
![]() |
| Stitched image showing 2-120 and 1-240 install by Chris Rapple. |
![]() |
| Going from my single bulb and 2 hand-activated drop lights (plus other drop lights) to this single switch full lighting rig. This should help a lot! |
Saturday, August 25, 2012
Big Bin of Links
Bin of Links
1965 chevelle polyester spray full restoration videos
Auto Restoration Assembly Sequence
Rust Removing Media Blasting
Full Safety Equipment - Sandblasting
Chris Rapple - Electrician - Raleigh NC
Pre-built 68 Coronet carpet for floor
Lake Norman Soda Blasting - Mooresville NC - Media Blasting company
Rust encapsulation under carriage paints
Miracle paint - a rust prevention
Eastwood rust encapsulator
POR 15
POR 15 video of application on 64 Fairlane on Rotisserie in home garage.
Panels and Body Parts
Jegs - 68 Coronet Panels including a full Rear Cross Rail replacement.
1965 chevelle polyester spray full restoration videos
Auto Restoration Assembly Sequence
Rust Removing Media Blasting
Full Safety Equipment - Sandblasting
Chris Rapple - Electrician - Raleigh NC
Pre-built 68 Coronet carpet for floor
Lake Norman Soda Blasting - Mooresville NC - Media Blasting company
Rust encapsulation under carriage paints
Miracle paint - a rust prevention
Eastwood rust encapsulator
POR 15
POR 15 video of application on 64 Fairlane on Rotisserie in home garage.
Panels and Body Parts
Jegs - 68 Coronet Panels including a full Rear Cross Rail replacement.
| 286$ Sherman Parts 263-68C B-Body Rear Cross Rail full replacement. |
Air chiseling the bottom of my car
This is what I did today: 8/25/12. I spent a good chunk of the day air chiseling the liner off of the bottom of the car plus a few other things. This is currently where the project is at. The car is on the rotisserie and much of the bottom is chiseled. There is tons and tons of media stripping work to be done. I'm looking into having 220v outlet installed for a new compressor and currently trying to keep the garage clean and research future needs (as can be seen posted in this blog).
![]() |
| Kobalt Air Hammer + Patience |
![]() |
| It is a very messy job and requires a lot of sweeping, blowing, and vacuuming |
| So glad I bought a wider Ingersol Rand air chisel. Now I need to find a skinny one and I should be set. |
Friday, August 24, 2012
Paint and Painting
The base paint I plan to use for my car is John Deere Blitz Black. This is a flat or matte black paint that is often used for tractors etc... but is now quite often used by hot rodders. JDBB for short. Durable and low cost.
http://blitzblack.com/
http://www.crankshaftcoalition.com/wiki/John_Deere_Blitz_Black_paint
http://forum.ih8mud.com/paint-body/565964-blitz-black-john-deere.html
http://blitzblack.com/
http://www.crankshaftcoalition.com/wiki/John_Deere_Blitz_Black_paint
http://forum.ih8mud.com/paint-body/565964-blitz-black-john-deere.html
| Great and inspirational flat black 69 GTX located near my home town |
| Flat Black Roadrunner |
| Great example of JDBB |
| Flat Black Charger |
Auto Body
I am moving into doing some Auto Body work. This includes structural and sheet metal welding. Media removal. Body filler work. Patch Panelling. etc...
Stripping disks
Auto Body - Patch Panelling videos
* Eastwood Patch Panel video. Cutting, measuring, welding etc...
* Butler Collision 3 part auto body video. includes welding
Stripping disks
Auto Body - Patch Panelling videos
* Eastwood Patch Panel video. Cutting, measuring, welding etc...
* Butler Collision 3 part auto body video. includes welding
Rotisserie / Twirler
This section holds information for Rotisserie and Twiler work for late 60's B-Body Mopar - Specifically 1968 Dodge Coronet. General Rotisserie information.
* Dodge Charger.com Forums - Rotisserie thread w/ images
* US Car Tool - Raleigh NC company that builds Rotisserie and Body wheels. They specialize in Mopar.
WORK IN PROGRESS
* Dodge Charger.com Forums - Rotisserie thread w/ images
* US Car Tool - Raleigh NC company that builds Rotisserie and Body wheels. They specialize in Mopar.
WORK IN PROGRESS
Thursday, August 23, 2012
Tubbing
* Hotrod.com DIY Mini Tubbing article (69 Satellite)
* Charger V10 Viper Mini-Tubbing
* US Car Tool 68 Dart Mini-Tubbing
* Youtube - Nova Mini-Tubbing
* Youtube - 69 Comaro Mini-Tub
* Youtube - 68 Truck
* Coronet Forums - 67 Coronet Mini Tubbing
* Moparts Forum - Tubbing thread
* Hot Rodders tubbing
*Tubbing a Torino
*Tubbing pics
Chassis Mods
*Martz Chassis - B-Body Suspension Full Kits
*Reilly Motor Sports (RMS) - Street-Lynx B Body Chassis mod
*Magnum Force - Chassis Mods
*Detroit Speed - Currently not for B-Body Dodge
* Charger V10 Viper Mini-Tubbing
* US Car Tool 68 Dart Mini-Tubbing
* Youtube - Nova Mini-Tubbing
* Youtube - 69 Comaro Mini-Tub
* Youtube - 68 Truck
* Coronet Forums - 67 Coronet Mini Tubbing
* Moparts Forum - Tubbing thread
* Hot Rodders tubbing
*Tubbing a Torino
*Tubbing pics
Chassis Mods
*Martz Chassis - B-Body Suspension Full Kits
*Reilly Motor Sports (RMS) - Street-Lynx B Body Chassis mod
*Magnum Force - Chassis Mods
*Detroit Speed - Currently not for B-Body Dodge
Rear tire fitting and information.
Some Coronet Rear Tire and Tubbing information.
* Coronet forums post about tire sizes and what will fit a 68 Coronet (People are saying you can, depending on specs of tire, probably just barely fit a 295 tire (295/50/15) which is 11.61 inches wide. You may need to raise the back up for clearance)
* Coronet Forusm 31-16.5 mickey Thompson sportsman (bias-ply) on tubbed Road Runner
* Dodge tire size ratings. This is a list of ratings and their corresponding sizes in US inches
Chassis Modifications for tubbing 1968 Coronet
* Martz Dodge 1968 - 19?? Tubbing and Front Independant Suspension kits
* Coronet forums post about tire sizes and what will fit a 68 Coronet (People are saying you can, depending on specs of tire, probably just barely fit a 295 tire (295/50/15) which is 11.61 inches wide. You may need to raise the back up for clearance)
* Coronet Forusm 31-16.5 mickey Thompson sportsman (bias-ply) on tubbed Road Runner
* Dodge tire size ratings. This is a list of ratings and their corresponding sizes in US inches
Chassis Modifications for tubbing 1968 Coronet
* Martz Dodge 1968 - 19?? Tubbing and Front Independant Suspension kits
| 295/50/15 (Ignore Rim) |
| 295/65/15 (Not sure if fits stock on Coronet) |
| 255/70/15 Rear Tires |
| Mini Tubbed - 29-15.5 mickey thompson sports man radial |
Wednesday, August 22, 2012
Tools
Complete list of tools (updated 8/22/12)
Air Tools
- Craftsman 33 Gal. 150 PSI Compressor
- Ingersol Rand 1/2 inch Impact Wrench
- Ingersol Rand Hammerhead Impact Ratchet
- Central Pneumatic 6" DA Sander
- Neiko Dual Piston Straight Line Sander
- Kobalt Air Hammer
- Kobalt Air Ratchet
- Kobalt Grinder
- Central Pneumatic Angle Grinder
Auto Body
- 3m Full Face Resp 6000 Series
- Painters Head Sock
- 3m Half Mask
- Plastic Automotive Body Trim and Molding removal tools
- US Car Tool Rotisserie (68 Coronet)
- US Car Tool Body Wheels (68 Coronet)
Mechanic
- Pittsburgh Floor Jack
- Craftsman Floor Jack
- Pittsburgh 2ton Engine Lift
- Craftsman Crawler
- US General "Roller" (cannot recommend)
- Milwaukee Cordless Drill
- Craftsman 12v Cordless Drill and Impact set
- Ridgid Shop Vac
- Leveler
- Ridgid Saw
- Craftsman Saws All
- Torch
- Heat gun
- Protective eyewear (goggles with lights on them)
- Drop Lights and Flashlights
- 20x20 Crate Fan
Documentation
- 2 Kodak PlaySports Zx5 Water/shock prook video cameras
- Brother Labeler (Try to label as many things as you can.)
- Black "White Board" and pens
- Small camera
- Cell phone camera (Galaxy S and SII)
Air Tools
- Craftsman 33 Gal. 150 PSI Compressor
- Ingersol Rand 1/2 inch Impact Wrench
- Ingersol Rand Hammerhead Impact Ratchet
- Central Pneumatic 6" DA Sander
- Neiko Dual Piston Straight Line Sander
- Kobalt Air Hammer
- Kobalt Air Ratchet
- Kobalt Grinder
- Central Pneumatic Angle Grinder
Auto Body
- 3m Full Face Resp 6000 Series
- Painters Head Sock
- 3m Half Mask
- Plastic Automotive Body Trim and Molding removal tools
- US Car Tool Rotisserie (68 Coronet)
- US Car Tool Body Wheels (68 Coronet)
Mechanic
- Pittsburgh Floor Jack
- Craftsman Floor Jack
- Pittsburgh 2ton Engine Lift
- Craftsman Crawler
- US General "Roller" (cannot recommend)
- Milwaukee Cordless Drill
- Craftsman 12v Cordless Drill and Impact set
- Ridgid Shop Vac
- Leveler
- Ridgid Saw
- Craftsman Saws All
- Torch
- Heat gun
- Protective eyewear (goggles with lights on them)
- Drop Lights and Flashlights
- 20x20 Crate Fan
Documentation
- 2 Kodak PlaySports Zx5 Water/shock prook video cameras
- Brother Labeler (Try to label as many things as you can.)
- Black "White Board" and pens
- Small camera
- Cell phone camera (Galaxy S and SII)
The road to my garage
I had the car transported to my garage. Here are a few pics I managed to take on the way and some of it in the garage before I really got into things.
Green car on the very right is the front of a Flat Vibrant Green / Flat Black 1966 Coronet 400cid. White car is a 1964 Dodge Dart Slant 6
| I'm gonna get a job at the Citgo and fill my Dodge up for FREE! |
| First shot in Garage. Car is ~17.5ft long and ~6ft wide |
One of the first things I did was check under the car to see how things were. Somebody had removed some of the body spray and did not replace it. This is what caused some of the bad rust behind the drivers seat.
I ordered a gas tank on the internet and installed it into the car. This was the first big job I did.
| 318 LA |
Car Purchase and Details
This 1968 Dodge Coronet 440 was picked up via Craigslist from a Mopar family in Valdese, NC.
Originally an Arizona car from Brecks Dodge of Tucson and family owned until 2006 and then transported to North Carolina.
It is a Coronet 440 with a 318 and 727 Torque flight. No wrecks. Very hard to start but runs. Power steering. Drum brakes. Bench seats. Column shift. 340 X heads. Offenhouser Aluminum 4 Barrel and new Edelbrock 1406 Carburator. Headers and Holly valve covers. 8 &3/4 w/ 3.23 open gears rear end. 15 inch Cragar Outlaws. OE Solid state and recently refurbished radiator. Extras included a working cluster and extra front grill.
Originally an Arizona car from Brecks Dodge of Tucson and family owned until 2006 and then transported to North Carolina.
It is a Coronet 440 with a 318 and 727 Torque flight. No wrecks. Very hard to start but runs. Power steering. Drum brakes. Bench seats. Column shift. 340 X heads. Offenhouser Aluminum 4 Barrel and new Edelbrock 1406 Carburator. Headers and Holly valve covers. 8 &3/4 w/ 3.23 open gears rear end. 15 inch Cragar Outlaws. OE Solid state and recently refurbished radiator. Extras included a working cluster and extra front grill.
There is some body work and rust damage around the bottom of the quarter panels. A nasty spot behind the driver and heavy but localized damage to the bottom rear where the frame meets the bumper brackets. Lots of dents and dings all around. Surface rust. Never re-painted.
These are the sellers images from Craigslist
1968 Coronet Project Blog has started
Project Firefly is a 1968 Coronet project car I picked up in October of 2011. I decided to start this blog and migrate the progress I had tucked into an HTML on my main web site over to here. There will be more to come.
1968 Dodge Coronet 440
318 LA / 727 Auto
Subscribe to:
Posts (Atom)









