Wednesday, November 6, 2013

Update / Pro Work

It has been a long time since posting. The way things have been going stuff had to change. I switched over to having a lot of core structural work done on the car professionally. A shop is working on it now. 
The balance of work responsibilities with how much actually needed to be done on the car vs my expertise got all out of whack. 


The rear end of the car was very rotted out and parts of the frame needed to be fixed. A lot of this was documented with pictures of me taking the car apart in my garage and doing the rotisserie over at http://www.dodgecoronet.com/ but the database was wiped. So that whole story-thread has been gone for a while now. I might put some older pics up here soon and try to recreate it a bit.

A lot has already been done. Rear crossmember stuff and frame patch were a big one. A surprise was having to replace the torsion bar crossmember. New floors and rear deck panel replaced. 


What I am currently researching is how the rear end of the car will be done. I am doing a mini-tub/4-link rear end. I was curious what recommendations you guys have to fill it out and where you would purchase. 
The idea is to get a big/wide tire back there.



Pic thanks to USCARTOOL

Saturday, November 17, 2012

Sanding

Lots of sanding on the quarter.  Some areas will need work. The bottoms are not nice at all and the sides have some dents. All bondo is from previous owners(s)


Saturday, November 3, 2012

My Ingersoll Rand SS5L5 is finally up and running! It works great and provides constant air with out waiting.   It was a long road to get to this point.

Ingersoll Rand SS5L5 5hp 60 Gallon 18.1CMF@90 135 PSI Max "Industrial" 230v Compressor

Tuesday, September 11, 2012

Car on Rotisserie, September 2012

Small image of car on rotisserie in garage. 

Quick Look - 68 Dodge Coronet Body in 3D - Work in Progress


A quick look at a render of the 3D Body of my 68 Coronet. This will be used for pre-vis, especially later for paint/style and stance.  

3d Studio Max - Mental Ray Photometric 


Garage upgrade - Outlets and Lighting

Chris Rapple came out and he (and partially I) installed a full lighting fixture for better lighting and also conduit with 2 independent 120 outlets and 1 240 outlet. These pictures are from directly after it was finished.

Stitched image showing 2-120 and 1-240 install by Chris Rapple.


Going from my single bulb and 2 hand-activated drop lights (plus other drop lights) to this single switch full lighting rig. This should help a lot!